- About us
- Products Showroom
- Information Center
- Contact Us
Features of 4-axis ceiling broom tufting machine WXD-4A004
1) WXD-4A004 is the special ceiling broom tufting machine in 4 axis machine series, with servo motors, used to produce ceiling broom with 150mm length of filament outside holes. Please note that the plastic brushes block should be with holes in mould, since it is only a tufting machine without drilling holes function.
2)With 5.4 inch touchable screen, the interface is available in various languages, such as Chinese, English, Spanish, Vietnamese, French, etc, as required by clients.
3) With PLC (Programmable Logic Controller), this operates precisely with excellent stability.
4) The working table of this ceiling brushes tufting machine is composed of straight-line guide rail and ball screw with high precision, which is quite stable and durable.
5) There are two grippers on working table, in the automatically working condition, which will work alternatively without stop.
6) Operators enters data for tufting positions by either “Teaching Mode” or “ Digits Mode”. On operation interface, operator could insert, delete, adjust, copy, separate and move holes, which is quite simple and convenient.
Technical Parameter for 4-axis ceiling broom tufting machine WXD-4A004
Standard Working Area of Working Table
X-axis x Y-axis x Z-axis x H-axis = 400mm x 100mm x 100mm x 360°(or 30°)
Material of Brush Bases
Material of Brush Filaments
PP, PVC, PET, nylon, pig bristle, horse hair, tampico, etc.
Length of Filaments (Outside Holes)
10mm - 180mm
Diameter of Brush Filaments
0.08mm - 1.2mm
Diameter of Holes
3mm - 5mm
Colors of Filaments
Either single color or two colors
Maximum Tufting Speed
4 holes per second
Specifications of Machine Body
1.20m(Length) x 1m(Width) x 2.05m(Height)
Motor (Power System)
Data Input for Tufting Positions
Teaching-type: Operator manually puts tufting head into each hole, one by one, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.
Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position.
With 5.4'' touchable monitor controller; interface is in English or other languages required by customers, operating in dialogue-mode, which is quite simple and easy.
Frequency-conversion stepless-adjustable speed
Qty of Programs Saved
It saves totally 84 programs for making different brushes.
PLC (Programmable Logic Controller)
Either 3-phase 380V or 1-phase 220V, 50-60Hz, 800W
FMS type. Operator could make other kinds of brushes, as long as he changes grippers.
Anchor-type (using flat wires)
Packed into wood cases.
Wood case for machine body: 1.50m x 1.52m x 2.08m
Wood case for computer box: 0.80m x 0.80m x 1.56m